It's been a while now, but as I recall, most dot matrix printers have a DIP
switch that controls where the printer skips the perforations between sheets
or not. You probably need to change the setting of that switch.

Signature
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP
>I am trying to print mailing labels (Avery 4013 - Continuous feed) from
>Word
> 2007 to a dot matrix printer and it is skipping 2 labels and not printing
> the
> first address line after the 2 blank labels.
Stephanie - 30 Jul 2007 23:28 GMT
Is the DIP switch manual or software? We cannot seem to locate it on the
Panasonic KX-P1124. Thanks
> It's been a while now, but as I recall, most dot matrix printers have a DIP
> switch that controls where the printer skips the perforations between sheets
[quoted text clipped - 5 lines]
> > the
> > first address line after the 2 blank labels.
Doug Robbins - Word MVP - 31 Jul 2007 04:31 GMT
Take a look at http://www.nefec.org/UPM/printers/mpa14.htm#Settings It
appears that it may be set through the printer control panel rather than by
physical switches.

Signature
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP
> Is the DIP switch manual or software? We cannot seem to locate it on the
> Panasonic KX-P1124. Thanks
[quoted text clipped - 11 lines]
>> > the
>> > first address line after the 2 blank labels.